The LCD display shows details about your bike such as battery charge, speed, and more! This guide will walk you through the various features of the LCD display. Watch the video below or click through each heading to learn more about the LCD display features and how to use them!
Some models are equipped with an LED display which includes a power button, battery charge indicator, PAS level selector, and PAS level indicator lights. The RadRunner and RadMission, which are shipped with an LED display, can now be upgraded to an LCD display using the LCD display upgrade available for purchase on our website! Take a look at The Scenic Route's blog post about it HERE and our installation guide HERE.
Each button and combinations of the 3 buttons perform a variety of operations and toggle between different information on the LCD Display. Check out the table below to see how you can view different information on your display with the touch of a button!
LCD Display Operations
Click HERE to learn more about walk mode.
- Turn off the LCD display. Press and hold MODE until the display turns off.
- Connect the device to the charging port using a USB cable. Plug a USB cable into the charging port on the display, then plug in the other end to your device.
- Turn on the LCD display. Press and hold MODE until the display turns on.