The Handlebar Mitts from Rad Power Bikes can be attached to any 2018 and later bike model from Rad Power Bikes. The Handlebar Mitts come with locking end caps for the handlebar that will replace the stock press-fit end caps. Follow the steps below to install the Handlebar Mitts on your bike.
If you are not confident in your ability to successfully and safely perform all steps, we recommend having the work performed or checked by a local, certified, and reputable bike mechanic.- Get the bike ready for maintenance. Turn off the bike, remove the battery, and press and hold MODE (or the power button) to discharge remaining power.
- Click HERE to access the installation instructions.
- Once the handlebar mitts are installed, reinstall the battery, test the bike fully, and ride Rad!
